Sell on Amazon Sign in
This article applies to selling in: United States

Non-full-size cribs

If you list products on our store, you must comply with all federal, state, and local laws and our policies applicable to those products and product listings, including this policy.

Non-full-size cribs covered by this policy

A non-full-size baby crib is designed to provide a sleeping accommodation for an infant. It is intended for use in the home, a child care facility, a family child care home, a place of public accommodation, for travel, or for other purposes. The measurements of a non-full-size baby crib must have both or either of the following:

  • Interior length dimension either greater than 139.7 cm (55 in) or smaller than 126.3 cm (49 and 3/4 in)
  • Interior width dimension either greater than 77.7 cm (30 and 5/8 in) or smaller than 64.3 cm (25 and 3/8 in)

This policy covers, but is not limited to, non-full-size cribs that can be folded or collapsed, crib pens, specialty cribs, oversized cribs, and undersized cribs. Please note that play yards are not covered by this policy. To find information on play yard requirements, go to Play yards.

Our policy for non-full-size cribs

Amazon requires that all non-full-size cribs have been tested to and comply with the specific regulation or standard requirements listed below:

Product Regulation/Standard requirements
Non-full-size cribs

All of the following:

  • CPSIA (Lead, Phthalates); and
  • CPSA Section 14(a)(5) (Tracking Label); and
  • 16 CFR Part 1130 (Requirements for Consumer Registration of Durable Infant or Toddler Products); and

Any one of the following:

  • ASTM F406 – 19 (Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards); or
  • 16 CFR Part 1220 (Safety Standard for Non-Full-Size Baby Cribs)

Required information

We may request this information from you at any time, so we recommend that you have it easily accessible:

  • Your company name (if applicable) and seller ID
  • Your contact information: email address and phone number
  • A list of all non-full-size cribs that you offer on our store
  • Images of the product and product packaging, as applicable, for all non-full-size cribs that you offer on our store. Images must include all sides of the product and product packaging.
  • Product images or test report as evidence of compliance with registration card requirement (16 CFR Part 1130)
  • Product images or test report as evidence of compliance with mandatory tracking label requirements (CPSA Section 14(a)(5))
  • Product images or test report as evidence of compliance with warning and hazard marking and labeling requirements (ASTM F406-19 Sec. 5.11 and ASTM F406-19 Sec. 9, or 16 CFR Part 1200), as applicable
  • Any product instructions and manuals for all non-full-size cribs that you offer on our store
  • A Children’s Product Certificate (CPC) for all non-full-size cribs, subject to this policy, that you offer on our store
  • Test reports from a CPSC-accepted lab that confirm that each product was tested to the regulations and standards listed above

Compliance services

If you need help getting compliance certifications, testing, and audits, use our service provider network.

How to submit information

If you receive a request from us for compliance documents, complete the following steps to submit the requested information:

  1. In Seller Central, select the Performance tab and choose Account Health.
  2. Under Manage your compliance in the bottom right corner, click Product Compliance Requests.
  3. To add compliance or appeal for a single product, click Add/Appeal Compliance. To add compliance or appeal for multiple products, select each product on the left hand side of the product and click Action Selected Products at the top of the product requirement table to make a selection about how you would like to submit documents and information.
  4. Provide compliance documents and information in the Provide Documents section, or provide appeal information and documents in the Appeal Request section.
  5. Click Submit for Approval to send your submission for review by Amazon.

Note: Test reports must contain images of the tested products that are sufficient to demonstrate that the product tested is the same as the product listed on the detail page.

Policy violations

If you do not provide the required information by the applicable deadline, we may take the following actions:

  • Remove the relevant product listings
  • Suspend your ability to add new products, listing privileges, or both
  • Withhold any payments due to you

We reserve the right to take any further actions that may be necessary in our sole discretion.

Additional resources

Disclaimer: The information provided on this page does not, and is not intended to, constitute legal advice. All information, content, and materials available on this site are for general informational purposes only.

Sign in to use the tool and get personalized help (desktop browser required). Sign in

Reach Hundreds of Millions of Customers

Start Selling On Amazon

© 1999-2022,, Inc. or its affiliates